collapse
collapse
Episode 00 - Name
Date
Safecoat Safe Seal is a multi-use, water- based, low gloss sealer for highly porous surfaces such as par- ticle board, plywood, processed wood and porous concrete. Used primarily to reduce toxic outgassing: in particular, it is highly effective at sealing in formaldehyde outgassing from processed wood such as plywood, particle board and pressed wood. Safecoat Safe Seal is virtually odorless on application and odorless once cured. -Highly effective at sealing in toxicity of underlying surface. n Safely used by and for the chemically sensitive. -Low odor, non-offensive to installer and occupant. -Fights indoor air pollution, seals in the outgassing from the substrate. -Low VOC content, meets or exceeds all federal and state air quality regulations, including California. -Contains no formaldehyde. APPLICATION: Always have adequate ventilation. Before using, stir Safecoat Safe Seal by gently rolling container to avoid air bubbles. Then apply as is, using a sponge, squeegee or appropriate spray equipment. It is important to apply in very thin coats. Thick coats will overly darken the color of underlying surface. For best results, this product should not be reduced. Use only during low or moderate hu- midity conditions. Milky appearance, dries clear. Apply only to a completely dry substrate. Correct application will often slightly deepen color of existing surface.
You will be taken to an external site to complete purchase.
HEALTH CLAIMS DISCLOSURE
The U.S. Food and Drug Administration has not evaluated the statements on this website. The information provided by lukestorey.com is not a substitute for direct, individual medical treatment or advice. It is your responsibility, along with your healthcare providers, to make decisions about your health. Lukestorey.com recommends consulting with your healthcare providers for the diagnosis and treatment of any disease or condition. The products sold on this website are not intended to diagnose, treat, cure, or prevent any disease.